puisi

CPU

What type of CPU to use? Will it be a Pentium, Pentium Pro, Intel, AMD, Cyrix, etc.?

	Intel is very solid in must cases, but being the "market leader" it generally has the highest price tag. Compatible with everything, and 99% of the software in the world is written either with, for, or on an Intel Chip.
	AMD is a very solid processor, and is usually faster than the same rated Intel chip… in everything but CAD programs, which Intel is still the leader. For Graphics without major number crunching, AMD is the current market leader.
	Cyrix, you roll the dice… I don't sell or support them. In DOS mode I had one that was twice as fast as the comparable Intel and AMD, but could not get it to stably function under Windows 95.

The 386 and 486 class processors are divided into two classes, the SX and DX. The SX class CPU lacks a built-in numeric co-processor (for large mathematical calculations), and usually operates at lower speeds. The DX class CPU has a numeric co-processor and at least 8 KB of internal cache memory built into the chip (the amount of cache is dependent upon the CPU manufacturer & is type specific, not upgradeable). The DX class 486 CPU is available in the type DX, DX2, and DX4. The DX chip can perform at speeds of 33, 40, 50, or 66 MHz. The DX2 chip uses a clock speed equal to half the speed of the processor, and performs at 50, 66, and 80 MHz. The DX4 triples the clock speeds and works at 120, 133, and even 166 MHz has been seen by a few people.

Intel's Pentium and AMD's K-5 Processors are currently considered "the biggest bang for the buck" processors on the market. They have been out for a few months, the price has dropped enough to make it more affordable for the average person, and the performance potential is incredible. I would give the Pentium Pro's, Pentium II's, and K-6 processors until early to mid-98 to come down in price, and get any quirks worked out. If you choose to move forward sooner, make sure that the company you purchase the motherboard and CPU from have used that specific combination before, and are able to solve any problems you might have. This is especially true with the K-6, which draws more current than any of the "normal" chips... but absolutely screams.

There are many different types of processors available today, 386's, 486's, Pentiums (otherwise thought of as the 586), Pentium Pro (the 686), and Pentium II's.
386's and 486's have all but disappeared from distribution so we will not give it any more mention. Pentium Pro II's are the newest technological advancements available to the public (a little over a year old). The standard Pentium and K-5 class processor is the most common CPU on the market still today, because of price, performance, and proven stability.

MMX - the latest buzz word in the CPU world. What is it? To the best of my knowledge, it interfaces with the video card, and video output. If you have a high-end video card then the processor doesn't seem to add much to the performance. If you have a low-end card, then the MMX technology brings certain video features home to the CPU for processing. Things like MPEG, and full screen AVI. There aren't many software programs out today that can take advantage of this technology. It will either be refined and turn into the best thing since sliced bread or just another marketing ploy with little performance increase to justify more money and to keep the upgrade cycle moving. Also, as of today, MMX technology is NOT available for the Pentium Pro or the Pentium II CPUs, although I have heard some retailers try to say that it is, and play off the new buzz words.

How is the CPU installed on the Mother-Board?
There are only four ways:

	soldered in - very bad, making the combination nearly impossible to repair or upgrade
	pushed in - common on the older mother boards, requires care for the insertion and removal process
	ZIF socket - most common today, and generally thought of as the best. Allows quick and easy insertion & removal without tools and CPU can't be put in backwards by accident.
	back plain architecture - not real common, but still happens. The CPU is fit onto a card that is then plugged into the motherboard. There is nothing technically wrong with this, except that the farther the components are from each other the slower some processes take. It also means that the board and components on it are likely to be proprietary and expensive.

In the event of upgrades - I have found that it is usually smarter, faster (time and actual processing speed), and less expensive in the long run, to just pull out the old motherboard/CPU combination, and put in a whole new motherboard/CPU combination rather than spend time messing with jumper settings (which require a manual) and wonder if everything will work (even if the manual says it will). Besides, I have almost always been able to find someone that wants to buy the old motherboard/CPU combo (as along as I see that they work).